The type of construction that involves homes being built offsite in a factory setting before being transported to the place of use is called modular construction. Pre-fab construction is the other name used to refer to this approach to construction. Many people commonly get confused thinking that all the three terms refer to different construction concepts. In all the three construction approaches, the home is built off-site before being trucked to the place where it will be installed. This is what Louisa modular homes are all about.
To begin with, a permanent foundation is made in advance at the construction site. A modular home is then delivered to the site and installed on the premade foundation. The home then becomes permanent on the site and cannot be moved once it has been installed on the foundation. Since such homes are constructed offsite, most people tend to think that they are not as good as homes constructed onsite.
A lot of change has happened to that even though the concern may have had some truth to it a few decades back. Nowadays, pre-fab homes are normally built in such a manner that they are highly durable and very strong. Site-built homes are even weaker than some pre-fab homes. One can also include as many modules as they see fit, but typically, a pre-fab home has between 3 and 7 modules.
A typical home can have a total square footage of 3000 square feet or more. Today, better technology has made it possible to design home of any shape and size that one wants. The individual modules can be made into shapes such as oval, circle, rectangle, and square. Sometimes a single module may incorporate more than one shape.
The modules are always transported to the installation site before they are completed. They are usually seventy to ninety percent complete at the time of trucking. The remaining work is normally done at the site after installation. Such works comprise of final touches and takes little time to be completed. Mostly they are done after installation of the modules to the foundation.
Large trucks which move through regular road system are used to transport the modules. A crane is usually used to unload the module once it gets to the site on installation. The module is then placed onto the foundation. The crew does the final touches once the module has been completely secured on the foundation.
Tying in siding, completing interior finish, and installing the roof section are some of the final touches involved. The company that built the home is considered to have completed its work at that point. After that, a private builder may be hired to complete extra features such as porches, decks, and garages. Instead of hiring a builder, one can also choose to add these features themselves if they have the skills needed.
Reports from FEMA show that modular houses have a high resistance to hurricanes as compared to conventional ones. This makes modular homes acceptable in the United State by local, state and the federal governments. For this to be effective, strict standards are set that manufacturers must always comply with during the entire process of constructing modular homes.
To begin with, a permanent foundation is made in advance at the construction site. A modular home is then delivered to the site and installed on the premade foundation. The home then becomes permanent on the site and cannot be moved once it has been installed on the foundation. Since such homes are constructed offsite, most people tend to think that they are not as good as homes constructed onsite.
A lot of change has happened to that even though the concern may have had some truth to it a few decades back. Nowadays, pre-fab homes are normally built in such a manner that they are highly durable and very strong. Site-built homes are even weaker than some pre-fab homes. One can also include as many modules as they see fit, but typically, a pre-fab home has between 3 and 7 modules.
A typical home can have a total square footage of 3000 square feet or more. Today, better technology has made it possible to design home of any shape and size that one wants. The individual modules can be made into shapes such as oval, circle, rectangle, and square. Sometimes a single module may incorporate more than one shape.
The modules are always transported to the installation site before they are completed. They are usually seventy to ninety percent complete at the time of trucking. The remaining work is normally done at the site after installation. Such works comprise of final touches and takes little time to be completed. Mostly they are done after installation of the modules to the foundation.
Large trucks which move through regular road system are used to transport the modules. A crane is usually used to unload the module once it gets to the site on installation. The module is then placed onto the foundation. The crew does the final touches once the module has been completely secured on the foundation.
Tying in siding, completing interior finish, and installing the roof section are some of the final touches involved. The company that built the home is considered to have completed its work at that point. After that, a private builder may be hired to complete extra features such as porches, decks, and garages. Instead of hiring a builder, one can also choose to add these features themselves if they have the skills needed.
Reports from FEMA show that modular houses have a high resistance to hurricanes as compared to conventional ones. This makes modular homes acceptable in the United State by local, state and the federal governments. For this to be effective, strict standards are set that manufacturers must always comply with during the entire process of constructing modular homes.
About the Author:
Get an overview of the things to keep in mind when choosing a builder of Louisa modular homes and more information about a reliable builder at http://www.haleyshomesinc.com/Options_page.html today.
Aucun commentaire:
Enregistrer un commentaire